1 / 11
The ARCbox - Genesis-themed storage box for the RG ARC-D/S — zdjęcie 1
1 / 11

The ARCbox - Genesis-themed storage box for the RG ARC-D/S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A nostalgia-fueled storage box for the Anbernic RG ARC handhelds.

Ocena
0 / 5
Polubienia
17
Pobrania
148
Wydruki
2
Wyświetlenia
898
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

For those of us who most closely associate the Anbernic ARC handheld with the Genesis/Mega-Drive systems - Store and protect your ARC with the nostalgia-fueled "ARCbox". This case will fit both the RG ARC-D and ARC-S devices.

This display box and carrying case incorporates the façade of the original Sega Genesis into a perfectly form-fit case, ready for displaying or taking your handheld on the go.

The box is designed to be printed in two halves - for best results, print the lower half of the box with the bottom facing down. For the lid, print at a 45-degree angle, standing on the hinge-edge with supports extending at least half-way up the body of the lid. That way you will not have the “ring” layer lines on the facade detail, but can still print without needing supports for any details. In my testing this gives the cleanest look on the fact but uses a good amount of material. It is designed to be able to lay flat as well, but it won't have as clean of a look to it. 

For the hinge, use a piece of filament approximately 45mm long on either side, or a 2mm metal rod/finish nail could be used as well. 

Tagi