articulated surprise gift box - caja regalo sorpresa articulada
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,08 € – 0,10 € netto (bez VAT)
Dla pliku: Box_B_0.4n_0.2mm_PLA_MINIIS_6m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,09 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 6 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Articulated multicolor surprise gift box, without supports, glue or multi-material
- Ocena
- 5 / 5
- Polubienia
- 262
- Pobrania
- 1316
- Wydruki
- 10
- Wyświetlenia
- 9000
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Articulated surprise gift box:
- Educational, its articulated base will allow you to surprise your friends with a surprise gift.
- Customizable, its pieces are printed separately, you can use different colors without needing a multi-material printer.
- No glue needed, all pieces are assembled using a inserts system.
- Does not need glue, all pieces are assembled by a fitting system. Does not need supports, it was designed to be 3D printed (FFF) taking care of every small detail.

Design based on the concept of circular economy (Reduce, Reuse, Recycle)*
*Reduce: Does not need glue or paint, you will use fewer raw materials in its manufacture.
*Reuse: If it gets damaged, its design by pieces through fittings will allow you to repair it and reuse the pieces in good condition to extend its useful life generating less waste.
*Recycle: Recycle: When you only use the melted filament from the 3D printing and avoid the use of glue, paints or other additives, you can easily recycle the piece again. Plus, its design even allows you to separate its pieces by colors or materials used, making the final recycling even easier.
Recommendations:
Do not change the orientation of the pieces, The model has already been separated and optimized for 3D printing avoiding the use of supports.
Do not use supports.
The model was designed to achieve a better result with a layer height of 0.2mm and a 0.4mm nozzle. If you have a Prusa Mini, use the 0.20 structural profile with Inpur Shaping.
The model was designed using tolerances between 0.2 to 0.3mm, to obtain good results in the fittings you must have your 3D printer well calibrated, if you are an original Prusa user this should not be a problem, I used a Prusa Mini and everything fit perfectly ;)
I recommend painting the seams in Prusaslicer to hide them as best as possible, you can also add small circles at the lower ends of the small pieces to have better adhesion (you can look at the 3MF file to get an idea).
As much as possible, prefer to use filaments that you can recycle in the area where you live to maintain the concept of circular economy of the model <3
The ribbons are straight-shaped on purpose so that you can configure a color change in them and thus achieve a more beautiful finish.
Assembly videos:
Happy printing :)
Akum.cl