[BaBo] paper towel modul
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A paper towel & spray bottle modul for the BaBo!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀
A simple paper towel & spray bottle modul for the BaBo System. This attaches to the bottom-most-modul the same way all other moduls are attached together. I have only tried this on the BaBo Duo and NOT the original BaBo, but I think it would still fit the original.
There are a total of 4 different versions, and 4 print profiles for Bambu Lab printers!
- Left-sided version with a 65mm cup size
- Right-sided version with a 65mm cup size
- Left-sided version with an 80mm cup size
- Right-sided version with an 80mm cup size
I am using the right-sided version with the 65mm cup size. The spray bottle cup holder should be in front of the paper towel rod.
The spray bottle I am using is a 12oz bottle that I had laying around which has a roughly 58mm round base. If you're looking for a spray bottle that will fit, this (affiliate link) 16.9oz spray bottle will fit either of the 80mm cup size versions.
If you're just starting out your BaBo journey and are looking for a little guidance, I've documented all the moduls and inserts I used along with many, many photos: My BaBo Build.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.