Tamiya Land Rover Defender 90 Bumpers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front and rear bumper for Tamiya Land Rover Defender 90 Body
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 747
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Front and rear bumper for Tamiya Land Rover Defender 90 Body.
There are some mounting holes for a winch and the front bumper itself. For the bumper mount you need 4 M2 threaded inserts. You need 8 2x8mm tapping screws to mount the bull bar.
Print front bumper upside down if you dont want to use supports.
Print bull bar with supports.
Winch and shackles are from Yeah Racing. You need 8 2x8mm tapping screws to mount the shackles.
The rear bumper is only to match with front bumper. You can mount it with shackles or just double sided tape.
I screwed it together with my reinforcement part and two shackles.