1 / 9
DuploSafe — zdjęcie 1
1 / 9

DuploSafe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A secret storage space inside a Duplo Block. Can be used as a small gift-enclosure.

Ocena
0 / 5
Polubienia
13
Pobrania
72
Wydruki
0
Wyświetlenia
362
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My grandson, who is a big Lego fan, wished for Christmas to get some money so he could buy some special bricks he needed for his own designs.

Giving an envelope with money in it, is boring. It is nicer to have something to unpack.

So I designed this “secret” storage inside a Duplo brick (a standard Lego brick was too small).

You need to look carefully to find the way how to open this box.

 

I printed all parts with a Prusa MK4 with 0.4 mm nozzle. PLA, 0.15 mm “structural” layers and  Input shaper. Only for the Block you need supports. 

I split the bottom in 2 parts: Bottom and Pseudbottom, to enable nice printing, avoiding supports.

After printing, glue carefully the Pseudobottom to the Bottom. I did it with superglue.

Because the tolerances are tight, your printer must be well adjusted.

The screws I finished by using a standard M6 nut. It was not necessary to use a thread cutter. It was in my print also not necessary to rethread the M6 threads in the bottom.

Please give feedback when you print it.

Have fun.

Tagi