Gridfinity USB Wall Chargers Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize your USB wall chargers with this 3x1 Gridfinity Bin!
- Ocena
- 5 / 5
- Polubienia
- 141
- Pobrania
- 999
- Wydruki
- 4
- Wyświetlenia
- 2777
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is a 3x1 gridfinity bin designed to store USB wall chargers with a North American style plug. The bin has holes on the underside for press fitting 6x2mm magnets if you so choose. It is 4 units tall, and has a lip so you can stack additional bins if you don't fill it up.
You should be able to comfortably store 4 chargers in here, but might be able to squeeze a fifth in if they're small enough.
Inspiration came from a model seen in this Reddit post, but the model on Printables has been deleted.
https://old.reddit.com/r/gridfinity/comments/wkzsrk/2nd_drawer_pretty_much_done_ikia_alex/