1 / 1
LUCKY 13 WORKING ROCKET LAUNCHER (rocket launcher toy)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a remix of Nakozen's 'rocket launcher toy' making it work with Soozafone's LUCKY 13.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 1389
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (47)Powiązane
PRINT WITH SUPPORTS IN ANY DIRECTION
(recommended upside down with supports (26 grams on UltiMaker Cura)
like Nakozen said -
Print Suggestions!
- I suggest a minimum of 3 walls to ensure spring is printed solid.
- Tolerances are extremely forgiving as long as your printer can handle overhangs up to 70 degrees, which most printers can handle with a little prayer!
- For the sake of the spring, print a little slower to mitigate the wobble. I print with Inner Walls at 40mm/s, and Outer Walls at 25mm/s. I'm lookin' at you, Bambu bois!
- A layer height of 0.16mm or finer may help with spring quality.
- For best results keep Z Seam away from trigger, it's easier hidden around back with the fake handle anyway!
If at first the launcher jams up, this is normal. Simply pump the piston a few times to loosen things up until it fires true!
original model - https://www.printables.com/model/432773-rocket-launcher-toy-print-in-place