Axial SCX6 - Shorty Receiver Box Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Shorty version to replace the "engine" receiver cap/box to aid in airflow, access to ESC and a much lower profile.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This shorty receiver cap replaces the stock “engine” cap with a simpler design to allow for better airflow, access to the ESC and a much lower profile. With this initial release the stock ESC is still needed though a clip for no ESC (in the stock location) is on the way.
This shorty version stands 35mm tall (top to bottom) or about 26mm off the top of the mounting base. You should still have plenty of room for your receiver.
This fits both the stock receiver box and the Vitavon V1 aluminum mount.
To complete you'll need:
2 x M3x10mm (12mm is ok too) for the cap retainer
2 x M3 nuts (locknut optional) for the cap retainer
2 x M3x10mm for the switch mount
1 x M3x20mm (or so) to allow the cap to screw into the stock location
The stock gasket is required and you'll need to take that from the stock receiver cap. You can use a hobby knife to carefully get it out.