1 / 2
Candle V20
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Symmetric candleholder for 4 20mm candles
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (30)Powiązane
A big print!
I printed my with a 0.6 mm nozzle with 0.15 mm layer height so I had to print support, but I suspect if you have a 0.4 and you print with lower than 0.15 mm you might be able to avoid support altogether.
Print time with my settings was roughly 17 hours.
Print with no fuzzy skin
I suspect it will look bad on the top part of the model.
Use lightning infill to save material.