Bed Tightening Jig - Minutes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since Klipper outputs the angle in minutes, I made a jig that is in minutes rather than degrees.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When leveling hotbed using silicone hose and Klipper, the amount you are told to tighten or loosen the screws is displayed in units of hh:mm.
This simple jig helps to ease this process and eliminate eternal trial and error guessing the right angle.
Simply attach the arrow to your screwdriver (M3 screw can help fix it to the screwdriver stem), then place scales part over the screw you want to work on. Insert screwdriver into screwhead and align 0° on the scales to match arrow.
Lines are 1 minute apart.
Print instructions
Print scales text side down for better readability. PLA is fine, can't go wrong with material.
0.4mm nozzle recommended
0.20 layer height
15% infill