1 / 5
Brompton Front Block Bottle Holder — zdjęcie 1
1 / 5

Brompton Front Block Bottle Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A water bottle holder designed to click onto the Brompton front luggage block

Ocena
0 / 5
Polubienia
12
Pobrania
154
Wydruki
0
Wyświetlenia
1528
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

I have a Brompton, but what I didn't have was anywhere i could put a water bottle for those leisurely rides

I created a water bottle that mounts to the front luggage block of a Brompton (so can easily be removed and fitted when required. I wanted the design to be as lightweight as possible so id didn't just look like a black toilet roll tube on the front of the bike. 

The design itself uses the block cover by jimschanz (https://www.thingiverse.com/thing:132096) to which i have designed and mounted the bottle holder and its base to form a solid unit. The design also features a front and rear hook so that a band can be placed over the bottle to further secure it within the holder. the next revision will have a closed hook on the rear so that the band can be attached without fear of dropping it. I also have a cap that the band passes through that sits over the bottle lid that i will upload separately.

It is designed to fit 600 ml Smart water bottles with room around the outside for easy removal

The print specifics;

Material: PETG (Prusament Black)
Layer: 0.30
Supports: Yes (painted on the flat parallel parts of the print, the ring at the top, the flats of the curves)
Time: 12 Hours (for my settings)

Any question or ideas for improvement feel free to chat, I'm sure there is room for improvement on this, but i can now ride wand take water with me!

Tagi