Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Olde Style 200mm Dice Tower and Base
- Ocena
- 5 / 5
- Polubienia
- 191
- Pobrania
- 1191
- Wydruki
- 3
- Wyświetlenia
- 4437
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
200mm high olde style dice tower and base, with a brick / stonework look. Get some colour matched dice for your tower's colour. Drop the dice in the top and they come out the bottom with some random numbers on them.
No supports needed. Just print and go. I used PLA+. Suggest you print the tower and base separately.
The tower can sit inside the base for storage, or over the top if you like. Scaling the base by 1% or so, for a less snug fit.
Note … as this is quite tall and takes a while to print, make sure your extruder can get all the way to the top of your printer without any interference … There is nothing worse than losing a day long print in the final stages.
Grab the CAD files and modify to add your own coat of arms.
Hey, post some of your makes … I would love to see them! :-)
And if you're going to lift and shift the design as your own ... fair enough I guess ... each to their own ... but maybe include the CAD files as the whole point of including the FreeCad files was so others could modify it and customise it to suit their own needs.
Ole mate on MakerWorld ...
https://makerworld.com/en/models/635749-dice-tower#profileId-2871911