Illuminated Hummingbird Remix

This is a remix of the remix created by GeoDave.  This adds Illumination.  You will need to download the parts library from GeoDave as I have only provided the ones associated with the illumination and motor size change.

The creator of this bird is Greg Zumwalt
https://www.instructables.com/Hummingbird/

Greg’s 25mm motor adapter 
https://www.instructables.com/Hummingbird-25mm-Motor-Adapter/

I printed the parts from GeoDave which are mostly not interchangeable because all threaded parts are a more printable thread.   GeoDave’s post explains why.  He provided some nice changes including beveled edges on the gear to ward off affects of elephant foot.  GeoDave also added a large selection of SCAD files to make modifications.

Other Parts
You need the parts library from Geo Dave as I provide the parts that were changed.
https://www.thingiverse.com/thing:2978552

Instructions on assembly are with Greg’s post.  Same quantity and variety of parts.

Parts used in the LED strip
here is a multi-pack… any 12V 1amp or over will work https://www.amazon.com/gp/product/B00FEOB4EI 

https://www.amazon.com/YUNBO-6000-6500K-Waterproof-Flexible-Cuttable/dp/B07K18HS94

Barrel Jack Connector
https://www.amazon.com/ThreeBulls-Pieces-5-5mmx2-1mm-Female-Connector/dp/B01N8VV78D

Adjustable Motor Controller  
Item size: 30*24*15mm This looks the same..
https://www.amazon.com/gp/product/B07WGT8K82 

sold under many names… for example
https://www.amazon.com/Onyehn-Controller3V-Control-Switch-Dimmer/dp/B07GP72BWV

Motor
20mm 50RPM motor.  They  also had a 100RPM in this size I think could be used. 
https://www.amazon.com/gp/product/B07D294GS7 

For the Dimmer a Capacitive LED switch.
Here are some links to some like products.  It needs to be 40mm x 10 or smaller.  I provide the base with switch center and a clip to hold the board in place if you print the base with the switch center in the back.
https://www.amazon.com/IKSACE-Capacitive-Control-Kitchen-Cabinet/dp/B08KDG1MZ5
https://www.aliexpress.com/item/32846782608.html
https://www.banggood.com/10pcs-DC-9V-To-24V-Touch-Switch-Capacitive-Touch-Sensor-Module-LED-Dimming-Control-Module-p-1323825.html

If you are going to try this illuminated Hummingbird, these are the parts I am providing and what they replace from GeoDave's Part library.

Stem (Replaces GeoDave’s Stem.stl)
Stem_with_Electric_Holes.stl

Choose a base.
 I showed the 20mm base with the motor directly mounted. (Replaces GeoDave’s Base_Mod_HollowBot_Rev9.stl)
I am providing the 20mm motor base and the 16mm motor base in case you want to try the adapter.
Base_LargerMotor_16mm_PowerCenter_SwitchCenter.stl
Base_LargerMotor_20mm_PowerCenter_SwitchCenter.stl

Threaded pin to hold wing to frame.
While it is a slip on pin… you can screw it in.  If it loosens… consider glueing.  It is such a short pint I printed it in PETG for a little flex.  It prints flat side laying down.  That should make the threads a little rough so it won’t come out. 
2mm_Threaded_Pin_for_Wing_Mod_Rev1.stl

Wheelbody and Connecting Rod
If you print the wheel body with recessed hole you will need the longer connecting rod. (Replaces  WheelBody_Mod_2x_Rev2.stl  and RodConnect_22_Mod_2x_Rev2.stl)
WheelBody_Mod_Rev2_Recessed_Nut.stl 
RodConnect_22_Mod_Rev2_Thicker_for_6_2_Recessed_wheelbody.stl

4mm Motor Gear
In case you want to see if you can get the motor gear on a 4mm shaft with breaking it… (replaces GearMotor_10_Mod_Rev8.stl)
Gear_Motor_10-tooth_4mm-Motor-shaft_Mod_Rev1.stl

From Greg’s Adapter library.. 
20mm to base with 16mm motor hole
20mm-Motor_to_16mm_Hole_Adapter_Sleeve.stl

16mm Version

Gear adapter… I think the original was already 4mm but I could not tell so I re-cast the hole with the size I used.
Motor_Gear_adapter_4mm-hole.stl

GeoDave Modified Parts

The six bolts I increased the shoulder on I am including so don't have to re-create the mod.  You can always make your own custom lengths from GeoDaves Scad files.

BoltWheelBody_Mod_Rev7+point3_shoulder.stl

BoltWheelBase_Mod_Rev7+point3_shoulder.stl

Bolt_61223_Mod_Rev8+point3_shoulder.stl

Bolt_6128_Mod_Rev7_8+point45_Shoulder.stl

Bolt_6104_Mod_Rev7+point3_shoulder.stl

Bolt_684_Mod_Rev7+point3_shoulder.stl

New Parts I added
capacitive_Switch_Bracket.stl   (holds the light switch board in the switch center)
Motor_hole_Plug_20mm_10mmdeep.stl   (covers the motor hole… a plug)

motor hole touch button... I don't recommend this option.  The switch center I added to the back provides a place for the board.  The motor button hole requires wires that at any point they touch something could short the ability for the touch sensor to work... but just in case you want to try... I have included the parts.  If you do this keep the wires separated.  You should find two holes in the print.    I wrapped my wires to the spring in cloth tape to help prevent touching and triggering the capacitance sensor.
Capacitive_Touch_Button_for_Motor_hole_16mm.stl  
Capacitive_Touch_Button_for_Motor_hole_20mm.stl  

If your touch spring is bigger than mine I have provided the SCAD file to regenerate the button with the appropriate spring retaining rings of your choice.  Motor_hole_Plug_or_Capacitance_button.scad

Other remix things people have done with this bird. 
https://www.thingiverse.com/thing:2913680
https://www.thingiverse.com/thing:3041589
https://www.thingiverse.com/thing:2930668
https://www.thingiverse.com/thing:3471293