Hook for Hanging Pots and Planters - Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric hook design for hanging up pots on vertical surfaces.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Looking to hang up some planters? This robust and parametric plant hook design can be customised to your needs!
This hook is mounted using two screws. The provided version uses a counterbore hole design for a flush fit of flat-bottomed screw heads, but this can be changed in the provided F360 file!
Be sure to pair this counterbore style hook with the provided 3d-printable washers! This will help prevent the hook from cracking during installation.
Suggested print settings are provided in the gcode and .3mf, but you are welcome to use your own of course. Some highlighted settings include:
- PETG plastic (Prusament Jet Black)
- 0.6mm nozzle
- 0.3mm layer height
- 1mm external perimeters
- 3 perimeters
- Organic supports on holes