Spring Loaded Guitar Pick Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize and store your loose guitar pics with this guitar pick holder. No glue or non-printed parts required
- Ocena
- 3 / 5
- Polubienia
- 24
- Pobrania
- 188
- Wydruki
- 2
- Wyświetlenia
- 1037
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
This spring loaded guitar pick holder holds up to 2 - 3 medium gauge picks (capacity varies by pick size) and includes a loop to make it easy to attach to a string or necklace.
The built-in printed spring helps keeps the picks secure so that they are less likely to slip out.
Print Steps
Print each of the three parts, placing the pick_backplate with the spring side touching the inside of the pick_bottom. Lastly, fit the pick_top over the pick_bottom.
Everything can be printed at 20% infill. The pick-top will need a little support for the lip. I use the touching build-plate support setting for this. The pick_backplate can be printed without supports with the flat side down (spring side up).
Your new guitar pick holder is now free to use to store your guitar picks.
Note: if the build-in pick_holder_backplate spring breaks, you can print a new one as needed. Some filaments are more flexable than others.
Also, if you're looking for nice guitar picks, try out my Alphabet Letter Guitar Picks.