Anker 335 Pixel Watch 2 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This should allow you to use a Pixel Watch 2 charger in combination with the Anker 335 charging station. You'll also need a USB-A to USB-C adapter.
The design features a small lip on the face of the adapter to stop the charger from going too far forward. There are also two bumps that should stop it from moving rearward. The fit should be snug regardless, but hopefully these will prevent it from working it's way loose. The two legs should also fit fairly snug into the charging station and engage the locking tabs.
When mounted with the charger, there will be a small amount of cable slack between the base of the adapter and the charger itself. Route this however you want.
Infill 10-15%, pattern doesn't matter. You'll want this to be a bit flexible so the printed part can bend and allow the adapter to snap in place.
You will almost certainly need supports on the build plate, snug if your slicer supports them.