Foldable coat hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed foldable coat-hanger that can withstand even heavy coats.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1123
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simone Giertz invented a foldable coat-hanger and ran a kickstarter campaign. I designed a 3D printed version.
It helps when your wardrobe is not deep enough for regular coat-hangers.
Print Settings
Material: PLA
Layer height: 0.2 mm
Perimeters: 3
Top layers: 3 layers (concentric top layer pattern for hangers ideally)
Bottom layers: 3 layers
Infill: 30% (ideally cubic or gyroid)
Supports: yes (just for holes and round underside of the coat-hanger)
Print Instructions
Print is easy, use supports for screw holes (use 1mm support/object xy distance for holes) and for bottom side of the round part only (use standard supports, not organic/tree). There is a 3mf for BambuStudio/OrcaSlicer with everything set up.
Assembly
You'll need:
- M3 bolt (ideally 10mm long)
- M3 nut
Steps:
- Remove supports.
- Insert M3 nut into bottom part of the connector.
- Put coat-hanger into the bottom part.
- Put the top part of the connector on top.
- Screw in M3 bolt.
- Enjoy!