Smart10 box + buttons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom made box for Smart10-game
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 317
- Wydruki
- 3
- Wyświetlenia
- 2006
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Custom made box for Smart10 trivia game. Including 1mm / 2mm thick marker-card, to keep track when the question cards are played through.
Everything prints without support.
Buttons have to be printed with TPU to work. PLA does not work, the “legs” broke easily when printed in PLA.
The box is designed to be used with 100 question cards. Without any marker-card, the box is quite loose, the cards will fall out easily. I recommend using 1.5mm marker card with 100 question cards, it's tight enough but not too tight. But you can try different options and find the best one for your taste.