Customizable finger snowboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No snow outside? Not a problem for your fingers! turn your desk into snowboard track with this toy/
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project is fully customizable! You can make it fit perfectly to your fingers or make it smaller to play with your kids :) Here's quick tutorial on changing parameters.
First, take a “comfortable riding position” with your fingers, don't stretch them too far as it can get a little uncomfortable while riding. Paste that dimension as a “finger_dist” parameter in fusion 360.
Second step is measuring diameter of your fingers. It's better to take a dimension of your wider finger. Then paste that into “finger” parameter in fusion 360.
You can also change rest of the parameters if needed:
- "board" - length of both sides of your board
- “lift” - It determines length and sublime of board lips as well as cups for your fingers, so be carefull with that
- “width” - width of your board
sometimes fusion 360 have problems with changing parameters, if you have this problem change “finger_dist” to lower value and then change it back to final value.