FairWeather Barebow tab 3D-Marks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-marks for the fairweather barebow tab. Usefull for archers with some eye-sight-difficulties.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 705
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 250211: As requested by XD474
made another version with negative indents. (and using this myself).
**********************************************************************
I'm beginning to have some issues with my aging eyes. I'm beginning to need reading glasses to have a sharp image for things that are close.
Shooting with those glases is not a solution as they provide no correct image for longer distances.
A friend of mine had a solution where he used a tab that uses metal pieces of wire as marks. (Zniper Tab). He is able to feel and count the marks with the tip of his thumb.
I wanted to make a similar solution for my FW-tab.
.. So I simply copied the marks on the tape and made a thin 3d-model of it.
Prototyping learned me that PETG works very fine as this is more flexible than PLA, .. but PLA will do also nicely IMHO.
I tried an orange “3d-tape” but that was not visible enough, so went for plain white.
After printing i simply highlighted the marks with a sharpy.
I removed the original tape, used some thin doublesided tape and added the "3d-marks".
After some testing, in a second and final version, I removed a bit of material of the tape-platform, reducing it from 3,4mm to 2mm.
This made the 3D-marks stick less out.
Hope this could help other (older) archers as well.
Please leave feedback.
**********************************************
Version v04: marks as the provided tape (with an interval of 3.125mm)
Version v05: marks with an interval of 4mm.
If you need a custom one, just send me a message.