GEN2 Modular Elfa Ventilated Shelf Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adapter brackets for mounting Jerrari’s excellent GEN2 Modular rails to Elfa 24” ventilated shelving.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I thought Jerrari’s modular storage system looked really neat, but most of the storage in my garage is all done with Container Store’s Elfa 24” ventilated shelving. I decided to try designing a simple top bracket that would snap into place, and allow the existing mounting holes in his top rails to be used with M4 countersunk screws w/ M4 nuts. It took a few iterations but I’m fairly happy with how they turned out.
I’ve been printing these using the same settings I was using for Jerrari’s parts. No supports should be needed.
M4 Screws: https://www.amazon.com/dp/B01E6EIMM8?psc=1&ref=ppx_yo2ov_dt_b_product_details
M4 Nuts: https://www.amazon.com/dp/B01HGIY1N0?psc=1&ref=ppx_yo2ov_dt_b_product_details
It’s probably not necessary to use all of the mounting holes. I wound up using 9 (all sides/corners plus the center) but you probably could get away with just 5 (4 corners and center) depending on how much you plan to attach to the rails.