1 / 1
Necklace/Earring Set - 81mm (3.2") long in ABS. Also, potential Ornament.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This set was printed at .1mm detail in generic ABS on my Prusa i3 MK3S+.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Public Domain
This Necklace/Earring set was printed at .1mm detail in generic ABS on my Prusa i3 MK3S+. Both the STL and Prusa 3mf slicer file are included. I used 2 perimeters with 8 mm/s travel at small radii. It was printed solid (1 set on the bedplate) with no brim or supports. They were smoothed with Acetone (brushed on). The chain holes printed well. Designed in SolidWorks.