Magazine Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The frame is made to print laying down flat and will not need supports. Slide the frame into the main body. A little…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The frame is made to print laying down flat and will not need supports. Slide the frame into the main body. A little glue may be needed to hold the slide in the frame.
Print as many dividers as needed.
I will be adding a larger divider in the near future.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament:
PolyMaker PLA+
Notes:
The frame is made to print laying down flat and will not need supports. Slide the frame into the main body. A little glue may be needed to hold the slide in the frame.
Print as many dividers as needed.I will be adding a larger divider in the near future.
Category: Other