1 / 2
JK Hoove — zdjęcie 1
1 / 2

JK Hoove

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

JK Hoove - Drum Hardware Memorized Placement

Ocena
0 / 5
Polubienia
4
Pobrania
178
Wydruki
0
Wyświetlenia
617
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

This is a drum hoove for memorized placing of your precious drum hardware stands. Inspired by JK Hooves, these should be suitable for most of your drum hardware stands.

Place 2 of them for each stand with velcro tape on a drum carpet for memorizing your setup.

For Infill you can go pretty low, since the design in itself is pretty sturdy. I went with 25% standard infill, but you can probably go lower. Also, printing without supports is fine, since no heavy overlap.
 

Tagi