3/4 Bench Dog with Brake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3/4" Bench Dog
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
¾" Bench Dog
My simple Bench Dog design includes a recess for a brake pad that can be printed for boards that can't be clamped because of rounded edges, or irregular shapes. See the Bench Dog-Brake.stl file if want to give that a shot using TPU.
Bench Dog is best printed with ABS or PETG, 4 walls minimum, 25% or higher infill, but you want to print horizontally with supports. While this is optional, it is much stronger.
The brake can be printed from TPU, 20% infill works, but I found 25% infill, with 3 top layers was good enough in many cases. It can be slippery though, so your mileage may vary. I am working on an updated version with ridges to help reduce the slipping.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Infill:
30
Filament:
Blue
Category: Tools