Recreator3D Modified Tensioning Rod Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned tensioning rod supports for the Recreator3D Mk5
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 614
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I encountered difficulty attaching the original design due to the fastener being positioned beneath the tensioning rod. The use of hex wrenches with a ball end could facilitate this process, but my current set only has flat ends. The fasteners are situated on both sides of the tensioning rod, simplifying the tightening process.
Please print two copies.
This design accommodates a 10mm rod, aligning with the specifications of the original Recreator3D Mk5 design. Additionally, I discovered that the shoulder of a 3/8" bolt or any available 3/8" rod can serve as a suitable alternative.
For your convenience, I've included the FreeCAD file used to create this part. Feel free to modify it if necessary.