Waste Bin / Trash Bin for Prusa Mini Base from David Warboss
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Was tired of carrying every little snippet to my big waste bin, so here's an attachable bin for the front right leg.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I had finished the amazing Prusa Mini Base of David Warboss - I still had to carry every brim, support, cleaning or material change waste to my offices big waste bin. As there are only small amounts that go to waste I wanted to have a neat bin near my printer that is not simply placed beside of it as many others would.
As David's design offer so much space and thougt through advantages I designed the one thing missing: a trash bin that attaches nicely to his construction.
I chose the right front leg for this purpose and modelled the bin by taking measures and angles from the right front leg's STL file.
I printed it in PLA but you can surely use whatever material you like.
Layer height: 0.2mm / Nozzle: 0.4mm
Didn't use supports the time I printed it first, but would definitely recommend some on the hexagons. No brim needed.
To keep the bin safely attached to the leg I glued two magnets:
- upper right hexagon of the leg: 1 neodymium magnet 10x2
- according hexagon of the bin from the inside: 1 neodymium magnet 8x
let me hear what you think about it, would like to see some makes.
Happy printing!