Diameter Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple gauge for determining the diameter of fillets.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 993
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The model is to determine roundings or other diameters, you can recognise it well with +- 1mm accuracy.
The case consists of two parts. A top and a bottom. It has a thread, depending on the tolerances that the printer creates you have to take different tolerances for the bottom, these are labelled T0.X. If it is too tight, use a higher tolerance. I have printed with a tolerance of 0.3mm and it fits well.
There are two versions of the plates, one labelled and one unlabelled. I chose the unlabelled one and then marked it.
I printed it with PLA with 0.15mm layer height and 60mm/s. But you can also print the plates with 0.2mm or even 0.3mm, I would print the case with 0.15mm because of the thread.
It takes about 3 hours and requires 20g of material.