1 / 5
Lens cap and hood for Fujica P300 cine camera
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Push-on protective lens cap and lens shade for a 1970s Fujica P300 cine film camera
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple push-on protective lens cap and push-on lens hood for the Fujica P300 Single-8 cine camera from the early 1970s.
Printed in ABS at 0.2mm layer height on a Prusa MK4, though PLA or PETG should work fine. I painted the inside of the lens hood with flat black paint to cut down on reflections from the gloss plastic.
The hood can fit onto the lens cap backwards for transport or storage.