1 / 1
Unofficial Nextion display enclosure for Gaggiuino — zdjęcie 1

Unofficial Nextion display enclosure for Gaggiuino

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gaggiuino enclosure for Nextion 2.4 inch display

Ocena
5 / 5
Polubienia
14
Pobrania
122
Wydruki
1
Wyświetlenia
2369
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of this model made by Matias Rossi. It houses the Nextion 2.4" display on machines like the Rancilio Silvia. I made this to mount it on the bottom part of my Silvia V3. You can then route the cable on the underside.

What has changed?

Moved the cable routing from the top to the bottom so it is compatible on older machines.

Additional hardware

  • 6x M2x5 self tapping countersunk screws
  • 4x 10x3mm magnets (some machines are not magnetic so check this)

Alternatively you can stick the enclosure to your machine with something like adhesive velcro.

If you printed this model and like it, consider uploading a make and giving the model (and the original) a like.

Tagi