Wyze Cam V2 Z Gantry Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a Z gantry mount for a Wyze cam v2. The mount friction fits over the belt tensioner and has a cable…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on a Z gantry mount for a Wyze cam v2. The mount friction fits over the belt tensioner and has a cable relief clip designed for a usb data cable that is between 3-3.5mm in diameter.
I designed this for my Voxelab Aquila X2 to make sure that there is adequate clearance between the cam and the digital display; I would imagine this will work well with an Ender 3 or any clones that have the same belt tensioner style.
Print Settings
Printer Brand:
Voxelab
Printer:
Aquila X2
Resolution:
0.2
Infill:
15
Filament: PETG Black
Notes:
The cable clip is small so you may want to use a brim if it starts lifting off the bed.
Category: 3D Printer Parts