1 / 3
Jack Pad For Daytona 1.5 Ton Aluminum Race Jack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a pad to protect pinch welds a little bit
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Material: TPU 90-95A
Nozzle: 0.4mm
Layer Height: 0.16mm(will give best results for Fillet Radius on bottom)
Line Width: 0.5mm for all
Print in all walls for best result, can be printed in 10+ walls and around 80%infill as well.
have had on my personal jack over 6 months in a professional shop environment. almost no signs of wear.