ratgdo 2.5i Enclosure with Wago 221 Lever-Nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of @samwiseg0's excellent ratgdo 2.5i enclosure and @ravi's wago 221 mount.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 186
- Wydruki
- 2
- Wyświetlenia
- 1591
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like landing multiple conductors on the obstruction and ground terminals on my garage door opener. I needed an enclosure for my recently purchased ratgdo boards, so I added a provision to hold a 3 position lever nut for the obstruction wiring and a 5 position lever nut for the ground wiring.
This is the version of the enclosure that requires the heat-set inserts and is intended for the 2.5i board.
I have also uploaded just the chopped down Wago lever-nut holder stl if anyone wishes to combine it with a different version of the ratgdo enclosure.
Superslicer throws some errors when I load the STL, but it repairs them all and it prints fine for me.