Expobar Steam Knob Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I always thought the steam and water knobs on my Expobar Minore IV looked unfinished with the screw plainly visible so…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
I always thought the steam and water knobs on my Expobar Minore IV looked unfinished with the screw plainly visible so I made some covers
As the cutout hole in the knobs has straight sides , I needed to make the covers in 2 parts. The base is held in by the original screw and the cover clips into the base.
I found that they are easy enough to remove for maintenance and just look so much nicer
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.15
Infill: 50%
Filament: Yxpolyer PETG White
Notes:
I used PETG for this because espresso machines are a bit too hot for PLA.