Snap-in Ring for Pet Food Bowl 151mm Diameter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-in ring to replace the (old) rubber ring around metal pet food bowls.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
This is a snap-in ring as a replacement/alternative for the rubber ring around these metal pet food bowls. The gcode, 3mf and STL file are specifically made for a pet food bowl with an outer diameter of 150.5 - 151.5mm and a rim thickness of 2mm - 2.4mm.
I added the parametric Fusion360 design. I created this design, with one single parameter where you enter the diameter of your bowl. Another parameter controls the thickness of the rim.
I provide this Fusion360 design as it is. I only tested a very narrow range of parameters, so you may have to change other parts of the design to make it work for different kind of bowls. 😄
Use PETG for the print, PLA is probably too brittle for the small hooks.
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights: