Fiber Laser Air Duct (Cloudray and Gweike)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This duct is made for Cloudray or Gweike fiber lasers and connects to a custom magnetic quick-connect hose.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 389
- Wydruki
- 3
- Wyświetlenia
- 2129
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This duct can be used with fiber lasers with threaded bases. The mounting holes span between 100mm and 112mm. It works great on Cloudray and Gweike fiber lasers. It adapts to a quick-disconnect duct. The magnets are 12mm x 8mm N52. They are press-fit, but glue can be added if necessary. Part is printed vertically with tree supports, rectangular duct facing the bed.
The duct coupler uses the same magnets and is made for a 3.5" hose. It gets printed face-down (handle pointing up). No supports are necessary as long as you can bridge reasonably well. There is a drawing for the coupler if you'd like to design your own.