Modified Lid for Combined Desiccant Cup / Hygrometer Mount for Filament Dry Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Lid to delete the top design for easier printing.
- Ocena
- 4,8 / 5
- Polubienia
- 42
- Pobrania
- 243
- Wydruki
- 4
- Wyświetlenia
- 1741
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed the lid for the Combined Desiccant Cup / Hygrometer Mount for Filament Dry Box. The original lid looked nice in the preview on the slicer, but when printed the design was just overhang pattern and didn't look so nice. I just imported the model into Tinkercad and deleted the top pattern so it's one flat surface. I also edited out the additional lip, so the lid sits all the way down into the container lid instead of raised up a bit. You can still grab it and pull it out of the box if needed or push it up from the bottom.
Printed on Creality K1 Max with .20mm setting.
(Note this is just the lid. Please see the original design for the cup since I made no changes there)