1 / 2
HeroQuest Wood & Metal Doors with Skull — zdjęcie 1
1 / 2

HeroQuest Wood & Metal Doors with Skull

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Metal & Wood Doors for HeroQuest heroes to enter and exit a scenario. Use in lieu of the brown & grey/blue doors.

Ocena
0 / 5
Polubienia
8
Pobrania
78
Wydruki
0
Wyświetlenia
423
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

HeroQuest Wood & Metal Doors for Heroes when entering/exiting a quest scenario.  The doors have a human skull on them.  I suggest printing with manual tree supports if your slicer is (Orca/Prusa/Bambu) then add a cylinder support enforcer under the chin of each skull.  For Cura users, get the custom support add-in and use a hollow cylinder under the chins of the skulls.  I printed the Doors in Prusament Azure Blue PLA at 210c (225c initial layer) with bed temp of 65c (70c initial).  I painted the Wood door with a copper paint pen.  Use a brim or mouse ears/tabs for the corners so they don't pull up from the bed.  Set the supports on the build plate only.

Tagi