Apple TV Remote minimal stand v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A redesign of my minimal remote stand for the Apple TV Remote.
- Ocena
- 4 / 5
- Polubienia
- 31
- Pobrania
- 320
- Wydruki
- 3
- Wyświetlenia
- 920
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Hi, this is my Apple TV Remote stand, remodeled with cleaner lines and simple curves for a sleeker, minimalist look. The facade now slopes at the same 70° angle as the Apple TV remote for a clean profile. The recess has been redone for a snug and perfect fit. There are four 7mm recesses at the base for adhesive rubber feet. Designed to print upside-down, use a textured PEI or starry PEY plate for a great looking finish.
This is a redesign of my Apple TV Remote minimalist stand. This stand was created for the 2nd and 3rd Generation Apple TV Remote. If you are not sure about compatibility, check here to identify your Apple TV remote.
Enjoy!