Improved Sermoon-D1 Part Cooling Fan Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Changes were made to lighten the assembly and improve the air flow.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The part cooling assembly was made lighter.
The center cooling duct was changed to pass more air flow.
Print the outlet ducts in ASA or ABS.
Note: the K1 hot end ducts are 2 mm longer (towards the bed) than the stock hot end ducts
This model is assembled from six parts. You will need the following hardware:
2 pcs M4x20 Allen screws with nuts (for the fan assembly.)
2 pcs M2x16 Allen screws with nuts (for the fan duct and outlet manifold assembly.)
The fan duct and outlet manifold assembly is mounted first. You will need to wiggle it into place as one of the duct branches fits between the GT2 belt driving the Y axis.
The fan plate, 5015 fan, and fan inlet are mounted next. If you wish, you can attach the filament guide.