Slide over spool holder extension for 2kg spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension for original Prusa spool holder. You can use the original injection molded parts.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Spool holder extension for original Prusa spool holder.
For MK3S+ and MK4 spool holders.
New part
Overview
The old part (1) is straight, new part (2) is more tapered. This helps to have a gap between Filament Guide addon and filament spool.
Might also help that smaller spools stay inside, near to the spool holder.
Gap to filament guide add on.
Assembly Instructions:
Clean the sliding surface (1) with sandpaper to remove seams.
Grease surface (1) slightly
For example with Universal lubricant from Prusa.
Take a knife and scrape down the edge from original spool holder arm, on both sides.
Slide the extension over the original arm of the spool holder.
Lock the arm using a screwdriver.
Old part
This is the gap when using the old part.
It is a tight fit with the filament guide add on.
-------------------------------------------------------
Designed with the help of FreeCAD, made possible by the dedicated efforts of its community.