1 / 3
Customizable (openSCAD) broom holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mountable broom holder that provides a firm grip.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 309
- Wydruki
- 1
- Wyświetlenia
- 712
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (53)Powiązane
This is my first try at an openSCAD design. I printed multiple of these clips using UltraABS-GF25 on my Qidi X Max-3. The inner diameter of the STL file posted is 21.5mm.
Using openSCAD, below customizations are possible. Simply download the zip-file for the project or clone from GitHub.
- inner diameter of the clip
- clip thickness
- clip height
- pin thickness
- thickness of the wall block
- screw type for the screw hole