1 / 3
Meanwell NES-150-24 mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crafted a quick mount to screw it to the surface.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I know it is a very specific holder, but it might come in handy for somebody few years down the road. I have found some odd things as well, that i did not have to create.
Quick draft to mount this type of power supply to a surface, using this as LED power supply under my bed. The distance between the holes according to Meanwell documentation 80mm.
https://www.meanwell.com/Upload/PDF/NES-150/NES-150-SPEC.PDF
Printed from PETG, solid completely as it will get hot eventually all the leds are wired up.