Lego compatible articulated bus or tram joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Son wanted an articulated bus, but I did not have the necessary parts so came up with this.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 1180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
My Son wanted an articulated bus, but I did not have the necessary parts so came up with this. The joint allows for approx 35-40 degrees articulation in both horizontal and vertical direction, which should be sufficient, but the cosmetics are not compomised.
Printed from 95A TPU, 0,2mm layer height, no supports.
The wall thickness of the articulating part is 0,5mm, works fine for 95A TPU. If You need to stiffen just use the STEP file. The standard studs are modified to be rather just cones, therefore You can print without any support, but a well set bridging is essential.
The height of the part is irregular, because ⅓ brick higher than a standard door, don't ask me why. If You need just remix, STL and STEP available.