1 / 3
Hydraflow 40 oz Capri Handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My daughter did get a Hydraflow 40 oz Capri for Christmas, but the handle broke. So I created the handle for 3D printing
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This handle can replace the handle of a Hydraflow 40 oz Capri (see https://hydraflowbottle.com/collections/40oz-capri). Sadly we dropped one and the handle just broke - just some bad luck I think. Anyways I then recreated the handle for 3D printing.
Some notes:
- I did print this with 3 perimeters and 25% infill, this configuration I can say works. You still may get good results if you use anything different.
- Filament used in my photos is Galaxy Silver PLA Prusament. It was just some random luck to have something laying around that actually matches the bottle design.
- The handle ring originally had a diameter of 101mm. I did widen it a little (101.2mm) because otherwise we did not mange to push this over the bottle. If the fit is to loose for you feel free to use the provided STEP file and create your own version. But then maybe you need to print your own tools to get this onto the bottle.
- The handle has a slightly different geometry, as otherwise it wouldn't print so nice - but follows the original design. Again, if you want to change anything use the STEP file.
Nice thing is that now you can have multiple versions of the handle in different colours. 🤩