1 / 1
Voron 18mm high round foot with mixed filaments — zdjęcie 1

Voron 18mm high round foot with mixed filaments

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This foot uses a TPU base to provide sound insulation from printer to room below.

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
122
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

User can adjust sound deadening by slicing foot with different number of perimeters and fill pattern/density. I used Ninjaflex, two perimeters and 15% adaptive cubic infill. The short foot height with two perimeters provides enough stiffness to support 300mm trident printer. The 15% fill provides good lateral travel absorption. Adjust settings to your liking. This design removed majority of sound transmitted through heavy table to room below hobby room.