1 / 7
Wonky Clock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meet Wonky Clock, the weirdo clock looking to make your desk a weirder place!
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 2880
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (75)Powiązane
Required parts:
- 3D printer (of course!)
- Filament of your choice
- 2 mm rod cut into two 38 mm lengths and two 26 mm lengths
- 7 692-2Z ball bearings (decent ones can be found on Amazon for about a dollar apiece)
- 2 AA battery holder: https://www.amazon.com/dp/B076C7S2VN
- 2 AA batteries
- 5 RPM miniature gear motor: https://www.amazon.com/dp/B07285FZV2
Recommended print settings:
- 0.25 mm, 0.2 mm, or 0.1 mm layer height recommended
- 0.25 mm nozzle recommended, but 0.4 mm should be fine
- Infill should be greater than or equal to 15%
- Parts don't require supports, though there are some 21 mm bridges on the Body parts, so it's up to you.
Assembly should be straightforward from the CAD model—built up layer by layer and press-fit together—, but if you need any help, feel free to leave a comment below. Tolerances are tight, so you'll need a mallet or similar tool to ensure fitment of some parts. CAD files are attached in both Fusion 360's native format and STEP. The model is designed to be easily modified, especially regarding the power source.