1 / 17
G35, G37, Infiniti, VQ35HR, VQ37HR Engine Cover Emblem Logo — zdjęcie 1
1 / 17

G35, G37, Infiniti, VQ35HR, VQ37HR Engine Cover Emblem Logo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My emblem was missing when I bought the car, so I designed my own, inspired by Pascal Godin PG-3D's model.

Ocena
5 / 5
Polubienia
24
Pobrania
460
Wydruki
1
Wyświetlenia
1588
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I did not have any 5mm length M3 screws, so I had to add a nut as a spacer to get the right depth. You will need some M3 5mm long screws, and some nuts to drop in when you set the pause in the layer height.

 

Here is a video of the M3 nuts being inserted at pause point you will need to set. You will need to set pause point just before the top layer of the nuts is printed. It might be different height depending if you print face down or face up, so just scroll through layers to find layer just before it fills the top of the nut holes.

Tagi