Plastic Razor Blade Scraper Wall Mount Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder to keep these cheap plastic razor blade scrapers in place, mounted to the wall with double sided tape.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 148
- Wydruki
- 1
- Wyświetlenia
- 1499
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
There are many scraper models here, but I prefer these cheap plastic razor blades. If you buy them there is often a simple scraper included, which works pretty well.
This is just a holder to keep it in place. This version is best mounted to the wall (printer?) with double sided tape.
Best printed as oriented in the stl file. Take care of good bed adhesion. If you have problems use a brim.
No support needed.
I also made a model for the the Ikea Skadis peg board.