Mandalorian Helmet with modular Rangefinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a remix of the chopped up mandalorian helmet with a rangefiner and a bayonet connector.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 1111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model connects the chopped up mandalorian helmet with a rangefinder and a cap with the mandalorian insignia.
The model is a remix of the Helmet (https://www.printables.com/de/model/583752-clone-trooper-rangefinder-bf2) and the Rangefinder (https://www.printables.com/de/model/583752-clone-trooper-rangefinder-bf2).
The original model is scaled for a head of ca. 58cm circumference and the model is not yet parametric so you'll have to scale it and figure out if the connections and stuff still fits.
The 100% scaled version uses 5 10x2mm neodynium magnets for the connector and a 3mm wood screw to connect the rangefinder to the female part.
The rangefinder uses a 24x37mm plexiglass screen which can be glued onto the inner shoulder.
There is also a a version of the rangefinder with a little cavity for a 6mm LED to illuminate the plexiglass screen.
I recommend printing with these settings:
20% Infill, Supports, Brim
Also I havent finished building the model yet so excuse the jagged pictures, will update when im done.